Sumitomo F50 Compressor Manual Free 2021 Jun 2026
Tighten the valve and check for leaks using a dedicated electronic helium leak detector or specialized leak detection fluid. 4. Maintenance Schedule and Adsorber Replacement
Every 30,000 hours (typically involves adsorber replacement) Operational Deep-Dive
The Sumitomo F-50 compressor is a critical industrial component, primarily utilized in high-precision cryogenic systems such as MRI magnets and laboratory cryocoolers
0.50 to 0.70 MPa (73 to 101 psi). Cooling Water Requirements Flow Rate: Minimum 6.0 L/min (1.6 gpm). Inlet Temperature: 5°C to 32°C. Maximum Pressure: 0.7 MPa (101 psi). 2. Installation and Setup Protocol sumitomo f50 compressor manual free
Understanding the fundamental parameters of the Sumitomo F-50 ensures safe operation and proper facility integration. Power Requirements 3-Phase 200V / 220V AC (±10%) Frequency: 50 / 60 Hz
: Low-pressure helium gas from the cold head enters the compressor capsule, where it is pressurized.
The F-50 is a mid-size, water-cooled, three-phase compressor belonging to Sumitomo Heavy Industries' Freedom series. It is meticulously designed for high-performance cryogenics. Key Features of the F-50 Compressor: Tighten the valve and check for leaks using
The manual dictates replacement every (roughly 3.5 years of continuous use).
⚠️ Never use standard commercial helium. The F-50 requires 99.999% (Grade 5.0) pure helium gas . Introducing lower-grade gas will contaminate the adsorber, freeze up the cold head, and cause catastrophic compressor failure. 3. Installation and Charging Procedures Verifying Helium Charge
(depending on the specific F-50 model) to prevent oil from entering the gas lines 4. Important Safety Warnings F-50SH Helium Compressor Manual | PDF - Scribd Cooling Water Requirements Flow Rate: Minimum 6
results in oil vapor migrating into the cryopump, where it freezes, plugs the regenerator matrices, and ruins the system.
Three-phase units require correct phase sequencing. If wired backward, the internal protection relay prevents startup.