Thomson Dpl 2000 Specs -
The receiver is designed to fit standard AV racks, though proper ventilation is recommended to prevent overheating. 4. Setting Up Your Thomson DPL 2000
: Supports DTS, Dolby Digital, and Dolby Pro Logic formats.
The following table details the technical parameters and architectural specifications of the Thomson DPL 2000 Technical Parameter Specification Metric 5.1 Channel Surround Sound RMS Power Output 5 x 100 Watts RMS (at 6 Ohms) Total System Power 500 Watts RMS System-wide Audio Codec Support Dolby Digital, DTS, Dolby Pro Logic, 3 Stereo Signal Detection Automatic Multichannel Format Sensing Tuner System 3-Band FM/AM Tuner with Radio Data System (RDS) DSP Environments 6 Digital Signal Processing Modes Equalization 6 Factory Equalizer Presets Analog Line Inputs 4 x Stereo Line-Level RCA Inputs Tape Loops 2 x Tape Record/Playback Audio Paths Digital Audio Inputs Coaxial Digital, Optical Toslink Video Switching S-Video, Composite Video IO Discrete Inputs 6-Channel Direct Input (Pre-decoded Analog Bypass) Subwoofer Output Dedicated Low-Frequency Effects (LFE) Pre-out Power Requirements 230V AC ~ 50Hz (European Standard Specification) Physical Dimensions 430 mm x 150 mm x 390 mm (W x H x D) Core Audio Decoding & Processing The processing engine of the Thomson DPL 2000 thomson dpl 2000 specs
The FM tuner includes the Radio Data System (RDS), which displays station names and song information directly on the front panel—a premium feature for its time.
: Includes a 6-channel direct input for external decoders. The receiver is designed to fit standard AV
A specific mode for systems without rear speakers, focusing the surround experience on the front and center stages. Technical Specifications at a Glance Specification Model Series Thomson Scenium Configuration 5.1 Channel A/V Receiver Total Power Output Power 5 x 100W RMS Decoders DTS, Dolby Digital, Dolby Pro Logic Tuner FM/AM Surround Tuner Compatibility Shared architecture with the DPL 2010 model Modern Maintenance and Troubleshooting
The DPL 2000 was designed as a high-fidelity surround receiver. Here are the primary technical details: Specification 2 x 100 Watts (8 Ohms) Power Output (Surround) 5 x 100 Watts (8 Ohms, 1kHz, 10% THD) Frequency Response 20Hz – 20kHz Decoding Formats Dolby Digital (AC-3), DTS, Dolby Pro Logic DSP Modes Theater, Hall, Stadium, Church, Arena Signal-to-Noise Ratio Tuner AM/FM with RDS and 30 Station Presets Connectivity & Inputs The following table details the technical parameters and
Supports higher bitrate DTS audio soundtracks, delivering an audiophile-preferred alternative to standard Dolby tracks. Analog Matrix Decoding
Dolby Pro Logic (for converting 2-channel stereo sources into matrixed 4.0/5.1 surround sound)
: Features automatic format detection for all three multichannel audio types.