Wella Climazon Millenium Manual Install «2024»
220V–240V AC (Standard European/International) or 110V–120V AC (US/Canada models). Check the data plate on your specific unit. Frequency: 50/60 Hz. Power Consumption: Approximately 1300W–1400W.
Ensure your outlet matches the unit's rating (typically 220–240V or 110–120V depending on your region).
Contains the five infrared heating zones, integrated fans, and LCD control panel. Support System:
: These are foldable and can be set in three different positions to accommodate different hair lengths and styles. Sensor Calibration : Ensure the temperature sensor
Lift the articulated wall arm and drop the main pivot pin into the top sleeve of the wall bracket. wella climazon millenium manual install
Feed the power cable carefully through the internal cable management tracks built into the arm segments. Step 4: Attach the Climazon Head
Minimum 30 cm radius around the head area for proper articulation and heat dispersion. Option A: Pedestal Stand Installation Step-by-Step
Your Wella Climazon Millennium box (or used unit) should contain:
Position the unit where the heat and airflow will not cause discomfort or interfere with other workstations. 2. Installation Options Climazon Millennium Go to product viewer dialog for this item. Power Consumption: Approximately 1300W–1400W
The "Skin Heat Protection" feature directs heat away from the client’s face and ears, which is a major comfort upgrade highlighted in salon reviews.
: Uses the ST5 tripod base . This setup includes a mobile base with three rollers and a tripod tube for portability within the salon.
Use the adjustment opening on the spring arm to set the load capacity. This ensures the device stays at the desired height without drifting up or down.
Lock the neck safety screw tightly to prevent rotation displacement. 5. First-Time Power On & Calibration Once fully assembled, perform the initial system check. Plug the unit into a grounded wall outlet. Support System: : These are foldable and can
Slide the chrome or aluminum inner extension tube into the outer pole. Be mindful of the internal spring counter-balance.
Push the five rolling casters firmly into the base sockets until they click into place.
Wall mounting requires a structurally sound wall (concrete, solid brick, or reinforced wood studs). Do not mount directly into unreinforced drywall. Step 1: Height Planning and Bracket Marking
Carefully attach the head unit to the articulated arm, ensuring all bolts are tightened.
If you are unfamiliar with electrical wiring or structural mounting, it is highly recommended to hire a professional electrician to avoid damage to the device or injury.