Michal
Online
Then click .
Which are causing difficulties? The Civil 3D version you are targeting for deployment. Share public link
Auxiliary Points and Auxiliary Links serve as internal construction lines. They are visible in the Subassembly Composer preview for calculation purposes but do not render or build geometry inside the final Civil 3D corridor. They are ideal for calculating intersection points or temporary slopes.
Make subassemblies dynamic by adding input parameters (width, slope, depth) that can be changed within Civil 3D.
Select the links created in Step 3 to form the enclosed shape. Subassembly Composer Autocad Civil 3d Tutorial Pdf
Contains the building blocks, categorized into Geometry (Points, Links, Shapes), Advanced Geometry (Curves, Fillets), and Workflow (Decisions, Switches).
: Essential for daylighting subassemblies, forcing links to project outward until they intersect with an existing ground (EG) surface. 6. Exporting to Civil 3D
Check the box to (This creates L1 connecting P1 to P2). Step 4: Add Conditional Logic for Daylighting
Simulates how the subassembly will appear in the Civil 3D Assembly tool palette. Toolbox Panel Then click
Autodesk Civil 3D is the industry standard for civil engineering design. However, standard out-of-the-box assemblies often fall short when dealing with complex, real-world corridor geometry. This is where the Subassembly Composer (SAC) becomes indispensable.
Start from the origin (P1) and add subsequent points and links based on your parameters.
To make a subassembly truly dynamic, you must implement decision logic and conditional targeting. Target Parameters
A real-time graphic display of your subassembly. It allows you to test variables and target parameters dynamically before importing the file into Civil 3D. 3. Core Geometric Building Blocks Share public link Auxiliary Points and Auxiliary Links
Drag a block from the Advanced section of the Tool Box into your Flowchart.
Points define specific coordinate locations. The very first point, , automatically represents the attachment point to the assembly baseline in Civil 3D. Points can be defined by: Delta X and Delta Y from an existing point. Slope and Delta X. Slope to a target surface.
Before dropping geometry onto the flowchart, navigate to the tab at the bottom of the screen and define the following variables: CurbWidth | Type: Double | Default: 0.500 CurbHeight | Type: Double | Default: 0.300 GutterWidth | Type: Double | Default: 0.250
: Building a standard lane with variable thickness.